2024 Land Pride SRT Series SRT76

Information

2024 Land Pride SRT Series SRT76

Kubota by Land Pride: SRT Series Forward and reverse rotation Rotary Tillers are great for seedbed or garden plot soil preparation. They are used in landscaping, nurseries, gardens, and light commercial applications. The formed and reinforced rear deflector leaves a nice smooth finish. Operators can vary tilling depth with curl and depth indicator to achieve the desired results. Only available through Kubota Dealers.

Features may include:

ADJUSTABLE SCARIFIER SHANKS

Adjustable scarifier shanks are constructed of hardened steel. These shanks are built tough to rip up hard soil.

SPIRAL DESIGN ROTOR

Bolt in spiral design rotor reduces bouncing of tiller. Rotor can be operated forward or reverse.

PATENTED DEPTH INDICATOR

Patented depth indicator shows the operator how deep the tiller is working in the soil without leaving the seat.

Photos

Highlights

  • Windsor, Nova Scotia
  • 2024
  • Land Pride
  • SRT Series SRT76
  • Available

Specifications

  • 2024
  • Land Pride
  • SRT Series
  • SRT76
  • Tillers
  • Motor rpm (Depending on skid steer flow and pressure) High flow motor: 133 to 244 rpm / 92-133 rpm
  • High motor: 16-23 gpm (60.6-87Lpm) with minimum 2600 psi (17.9 mPa)
  • High flow motor: 2300 psi (15.9 mPa) min. / 4500 psi (31 mPa) max
  • Universal Quick Attach Hitch
  • Side shift capabilities: 6 in (15.2 cm) To the right
  • 76 in (1.93 m)
  • 88 1/2 in (2.25 m)
  • Tilling: 2, 4, & 5.6 in (5.1, 10.2, & 14.2 cm)
  • swing: 18.3 in (46.5 cm)
  • 880 lbs (399 kg)
  • Depth indicator (Patent-pending): Depth indicator (Viewable from operator seat) | Direction of travel: Bi-directional (forward and reverse) | Skid shoes: Replaceable | Number of shanks: 6 | Shank retainers: Spring loaded retaining clips 2
  • Number of rotor: 11 | Number of tines per: 4
  • Tine: Bi-directional forged hardened “C” shaped | Shank: 3/4 in x 2 1/2 in x 16 in (19 mm x 64 mm x 406 mm) Adjustable hardened steel with 3 adjustable depths | Deck plate: 1/4 in (6 mm) steel plate / End plates: 3/8 in (10 mm) steel plate