2024 Land Pride WC15 Series WC1503

Current Land Pride Material-Handling WC15 Series

Swipe to View More

Year 2024
Make Land Pride
Model WC15 Series

Year 2024
Manufacturer Land Pride
Model Name WC15 Series
Trim Name WC1503
Generic Type (Primary) General
Engine Power 12 to 30 hp (9 to 22kw)
Minimum Engine Power 25 hp for maximum capacity

Land owners can utilize a Land Pride WC1503 Wood Chipper and their subcompact tractor to quickly turn mountains of limbs into chips for mulch or just to aid in decomposition. Driven by the tractor's PTO, this unit features a self-feeding 3" cutting capacity, two reversible and replaceable hardened-steel knives, adjustable discharge chute, and dual B-section drive belts. Adjustable support stands help elevate the Wood Chipper to match the height to your tractor's output shaft, enabling the driveline to remain straight and level. S/N 871375+ is compatible with QH05.

Features may include:

QUICK-HITCH COMPATIBLE

Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.

SUPPORT STANDS

Adjustable support stands help you match up to a tractor easier and allows the unit to sit on the ground while keeping the driveline near level. Extends life of driveline u-joints.

270° DISCHARGE CHUTE

Adjustable rotating discharge chute directs where wood chips will be discharged. Chute rotate stops keep the chute from discharging chips toward the operator.

CUTTING KNIVES

1/4" Hardened steel cutting knives are reversible and replaceable. Each knife has two cutting edges - when one is worn, rotate 180° to a new cutting edge. Less downtime required to sharpen rotor knives. WC1503 - 2 knives / WC1504 - 4 Knives.

Engine

Engine Power 12 to 30 hp (9 to 22kw)

Minimum Engine Power 25 hp for maximum capacity

Drivetrain

Driveline Category: Cat. 2 with shear bolt

Operational

Operating Speed Power Take-Off: 540 rpm | Rotor: 1984 rpm

Chassis

Hitch/Type Cat.1 w/ Quick capabilities

Dimensions

Dimensions Upper Hitch Plate Thickness: 1/4" in (6 mm) | Main Frame Thickness: 3/16" in (5 mm) | Rotor Housing Thickness: 3/16" in (5 mm) | Main Drive Pulley Diameter: 16.35" in (41.5 cm) | Rotor Pulley Diameter: 4.5" in (11.4 cm) | Chip Capacity: 3" in (7.6 cm) | Hopper Inlet Opening: 14" in x 15" in (35.6 cm x 38 cm) | Chipper Inlet Opening: 6" in x 3" in (15.2 cm x 17.6 cm) | Spout Discharge Opening: 3 1/4" in (8.3 cm) Square | Knife Size: 2.5" in x 2" in x 1/4" in (6.4 cm x 5.1 cm x 0.6 cm) | Chip Chute Position: 270 degrees

Rotor Diameter Size: 17.5" in (44.5 cm)

Height Feed Above Ground: 35" in (89 cm) Without adjustable skids

Weights

Weight 378 lbs (172 kg)

Features

Features Cutting Knife: Reversible and Replaceable

Belt Type 2 single B section | Tensioner: Spring loaded with adjustment

Knife Quantity Number of: 2

Construction Material Knife: Hardened Steel (Specifically designed for chipping)

Feed System Self-feed

Adjustability Feed Height Adjustment: 6 Settings

2024 Land Pride WC15 Series WC1503