2024 Land Pride RC2512 Series Base

Current Land Pride Rotary-Cutters RC2512 Series

Swipe to View More

Year 2024
Make Land Pride
Model RC2512 Series

Year 2024
Manufacturer Land Pride
Model Name RC2512 Series
Trim Name Base
Generic Type (Primary) Rotary Cutters
Engine Power Tractor horsepower: 40-100 hp (30-75 kW)
Lubrication Gearbox capacity - Splitter: gear lube 80-90W EP / Center & wings: gear lube 80-90W EP

2024 Land Pride RC2512 Series

Land Pride's RC2512 Rotary Cutter is designed for smaller tractors while retaining the features and benefits of larger folding cutters. The 12' width, sharp turning radius, and low tongue weight makes this an ideal Rotary Cutter for compact tractor owners that need a large rotary cutter for light agricultural and municipal grass maintenance.

Features may include:

GEARBOX WARRANTY

5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

1-1/2" CUTTING CAPACITY

These cutters offers 1-1/2" cutting capacity. See Operator's Manual for more information.

ADJUSTABLE JACK ANGLE

Helps keep park jack vertical when in use.

LED SIGNAL LIGHTS

LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

BEVELED SKID SHOES

Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.

10 GAUGE STUMP JUMPER

Round stump jumper allows cutter to slide over obstructions protecting gearbox output shaft & bottom seal.

SPRING CUSHION

Deck-mounted spring cushion provides a smooth ride in rough terrain.

DUAL LEVELING RODS

Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain.

NARROW TONGUE DESIGN

Narrow tongue design handles tight turns - great size for country estates.

Engine

Engine Power Tractor horsepower: 40-100 hp (30-75 kW)

Lubrication Gearbox capacity - Splitter: gear lube 80-90W EP / Center & wings: gear lube 80-90W EP

Drivetrain

Gearbox Gearbox horsepower Splitter: 160 hp (119 kW) / Center & wings: 100 hp (75 kW) | 6 Spline

Driveline Input: Category 4 with constant velocity u-joint | Intermediate & wing: Category 3 with slip-clutch

Wheels & Tires

Wheels 20.5" x 6.75" x 10" (52.1 cm x 17.1 cm x 25.4 cm) used aircraft tires or 21" (53.3 cm) laminated wheels | Number of: 4 - Wheels: 2 on transport axle and one on each wing axle

Operational

Operating Speed Blade tip At 540 rpm - Center Blades = 16,500 FPM (83.8 mps) / Wing Blades = 16,000 FPM (81.3 mps)

Chassis

Hitch/Type LP Performance hitch and swivel hitch

Lights and Safety

Lighting Signal: LED / 7 Pin connector: SAE J560 pin configuration

Dimensions

Dimensions Gearbox shafts Input shaft: 1 3/8" (3.5 cm) 6 Spline / Output shaft: 1 1/2" (3.8 cm) | Cutting capacity: 1 1/2" (3.8 cm) | Lift hydraulics: 2 1/2" bore x 8" stroke hydraulic cylinder, hoses, fittings and stroke control spacers | Wing folding hydraulics: 2" bore x 8" stroke hydraulic cylinders, hoses, and fittings | Wing flex while operating: Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground. | Blades - 6 (2 per deck): 1/2" x 3" (1.3 cm x 7.6 cm) Heat treated free swinging alloy Steel with up lift | Blade overlap: 6" (15.2 cm) | Stump jumper / blade holder: 10 Gauge (3.4 mm) round dish shaped pan, reinforced with 1" x 3 1/2" (2.5 cm x 8.9 cm) blade bar

Cutting Width 12'-0" (3.66 m)

Overall Width cutter: 12'-7" (3.84 m)

Transport Width Minimum: 7'-11" (2.41 m) With front cutting blade 1 1/2" (3.8 cm) off the ground.

Overall Length 13'-3" (4.04 m)

Deck Height 11" (27.9 cm)

Height Cutting: 1 1/2" to 12" (3.8 cm to 30.5 cm)

Capacities

Oil capacity Gearbox capacity - Splitter: 4.5 pints (2.13 L) / Center & wings: 4 pints (1.89 L)

Features Hitch jack: (2,000 lbs) (907.2 kg)

Weights

Weight Hitch: 793 lbs (359.7 kg) | Machine: 2,540 lbs (1152.1 kg)

Features

Features Wing transport protection: Wing transport locks | Skid shoes - Wing deck: 1 replaceable per wing / Center deck: 2 replaceable shoes | Blade rotation Left wing: Counterclockwise / Center deck: Counterclockwise / Right wing: Clockwise | Blade bolt: Keyed with hardened flat washer and locknut | Front & rear guards: Single chain | Transport axle: Spring-cushioned lift cylinder

Construction Material, Deck 10 Gauge (3.4 mm) deck

Construction Material Side skirt: 3/16" (5 mm) Plate

Hub Type Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.