2024 Land Pride RC3614 Series RCM3614

Information

2024 Land Pride RC3614 Series RCM3614

Land Pride's RC3614 and RCM3614 Series Rotary Cutters provide excellent cutting performance on gently sloping or slightly contoured right of ways, pastures, and set-aside-acres. The 14' cutting width, 2" to 12" cutting height and ability to cut weeds and brush up to 2" in diameter make them well suited for these applications. Both models offer pull-type self-leveling clevis hitches for attachment to 70-160 HP tractors. The RC3614 and RCM3614 cutters offer Cat. 6 main input drivelines for attachment to 540 rpm or 1000 rpm tractors. They also offer various hitch and tire options making them an excellent choice for agricultural, airport, and municipal mowing applications.

Features may include:

GEARBOX WARRANTY

7 Year Limited Gearbox Warranty shows confidence in gearbox integrity.

2" CUTTING CAPACITY

These cutters offers 2" cutting capacity. See Operator's Manual for more information.

ADJUSTABLE JACK ANGLE

Helps keep park jack vertical when in use.

LED SIGNAL LIGHTS

LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

Photos

Highlights

  • Windsor, Nova Scotia
  • 2024
  • Land Pride
  • RC3614 Series RCM3614
  • Available
  • Cutting: 2" to 12" (5 to 30 cm)

Specifications

  • 2024
  • Land Pride
  • RC3614 Series
  • RCM3614
  • Rotary Cutters
  • 70-160 hp (52-119 kW)
  • Gearbox: Gear Lube 80-90W EP
  • Input: ASAE Cat. 6 with constant velocity u-joint.
  • 250 hp (186 kW) Splitter / 130 hp (97 kW) Center & Wing
  • Tire options: 6" x 9 x 21" Laminated tires / 27" x 7.75" Used aircraft tires with foam filling / 29" x 9" Used aircraft tires without foam filling
  • Number of 5 - Wheel option: 4 on transport axle and one on wing axle. / 6 - Wheel option: 4 on transport axle and two on wing axle
  • Blade tip: 16,500 fpm (83.8 mps)
  • Hitch jack: Standard
  • Signal: LED | 7 Pin connector: SAE J5560 pin configuration
  • Cutting capacity: 2" (5 cm) | Lift hydraulics - center deck: 3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers. / right wing: 3" x 8" Rephasing hydraulic cylinder with hoses & fittings. | Wing folding hydraulics: 3" x 12" single-acting hydraulic cylinder complete with hose & fittings. | Wing flex while operating: Max. 20 down, can float up as needed as long as the wheel(s) are still on the ground. | Blade overlap: 6" (15 cm) | Stump jumper / blade holder: 10 Gauge (3.4 mm) round dish shaped pan, reinforced with 1" x 4 1/2" blade mounting bar. | Axle fasteners: 1 1/4" Greasable pins
  • 13' - 6" (4.11 m)
  • 14' - 9 1/4" (4.5 m)
  • Minimum: 9' - 2 1/2" (2.81 m) With cutting height at 2"
  • 17' - 6" (5.33 m) With cutting height at 2"
  • 13" (33 cm)
  • Cutting: 2" to 12" (5 to 30 cm)
  • 4 Blades (2 per carrier): 1/2" x 4" (13 mm x 102 mm) Heat Treated Free Swinging Alloy Steel with up lift
  • Gearbox: 5.18 Pints (2.45 L): Divider Gearbox / 6.76 Pints (3.2 L): Center deck, LH deck & RH deck spindle gearboxes
  • Deck material: 1 - Piece | Skid Shoes - wing deck Replaceable: 1 Standard straight skid shoe and 1 AR400 leading skid shoe / center deck ght skid shoe and 1 AR400 leading skid shoe Replaceable: 2 Skid shoes / weight box Reversible & replaceable: 1 Skid shoe | Blade bolt: Keyed with hardened flat washer & locknut. | transport axle: Spring-cushioned on center transport axle
  • hitch: 2,220 lbs (998 kg) / total: 5,620 lbs (2549 kg)
  • Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
  • 10 gauge (3.4 mm). | Side skirt material: 1/4" plate (6 mm)