2024 Land Pride RC4614 Series RC4614

Information

2024 Land Pride RC4614 Series RC4614

Land Pride's single wing, 14-foot RC4614 / RCM4614 Rotary Cutter, is designed for use in contract- and municipal mowing applications. Right of ways, roadsides, pastures, open areas, and row crop fields are all candidates for this heavy-duty cutter.

Features may include:

3" CUTTING CAPACITY

These cutters offers 3" cutting capacity. See Operator's Manual for more information.

BEVELED SKID SHOES

Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.

Photos

Highlights

  • Windsor, Nova Scotia
  • 2024
  • Land Pride
  • RC4614 Series RC4614
  • Available
  • Cutting: 2" to 12" (5 to 30.5 cm)

Specifications

  • 2024
  • Land Pride
  • RC4614 Series
  • RC4614
  • Rotary Cutters
  • Tractor horsepower: 70 to 250 hp (52.2 to 186.4 kW)
  • Gearbox: Gear lube 80-90W EP
  • Input: ASAE Cat. 6 with constant velocity u-joint. | Intermediate & wing: Cat. 5 with slip-clutch
  • horsepower: Splitter gearbox: 250 hp (186.4 kW) / Center & wing gearbox: 210 hp (156.6 kW)
  • 6" x 9 x 21" Laminated tires / 27" x 7.75" Used aircraft tires with foam filling / 29" x 9" Used aircraft tires without foam filling | Number of: 5 - Wheel option: 4 on transport axle and one on wing axle. / 6 - Wheel option: 4 on transport axle and two on wing axle.
  • Blade tip: Up to 17,000 fpm
  • jack: Standard rating
  • Signal: LED / 7 Pin connector: SAE J560 pin configuration
  • Cutting capacity: 3" (7.6 cm) | Lift hydraulics Center deck: 3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers. / Right wing: 3" x 8" Rephasing hydraulic cylinder with hoses & fittings. | Wing folding hydraulics: 3" x 12" single-acting hydraulic cylinder complete with hose & fittings | Wing flex while operating: Max. 20o down, can float up as needed as long as the wheel(s) are still on the ground. | Side skirt material: 1/4" (6 mm) plate | 4 Blades (2 per carrier): 1/2" x 4" Heat treated free swinging alloy steel with up lift. | Blade overlap: 6" (15 cm) | Axle fasteners: 1 1/4" Greasable pins
  • 13' - 6" (4.11 m)
  • 14' - 9 1/4" (4.5 m)
  • Min: 9' - 2 3/4" (2.81 m) with cutting height at 2" (5 cm)
  • 17' - 8 1/2" (5.4 m) with cutting height at 2" (5 cm)
  • 13" (33 cm)
  • Cutting: 2" to 12" (5 to 30.5 cm)
  • Gearbox: Divider gearbox: 6.2 Pints (2.93 L) / Center deck, right-hand deck spindle gearboxes: 4.7 Pints (2.22 L)
  • Skid shoes Wing deck: Replaceable: 1 Standard straight skid shoe and 1 AR400 leading skid shoe / Center deck: Replaceable: 2 Skid shoes / Weight box: Reversible & replaceable: 1 Skid shoe | Blade bolt: Keyed with hardened flat washer & locknut. | Stump jumper / blade holder: Standard: 1" thick diamond blade bar | Front & rear guards: Single chain or double chain. | transport axle: Spring-cushioned on center transport axle.
  • Total machine: 6,125 lbs (2778 kgs) Front & rear single chain guards, 5 AC tires, diamond blade bar with dishpan, without deck ring, CV driveline, and standard clevis. / Tongue: 2,220 lbs (1007 kgs)
  • 1 - Piece, 10 gauge (3.4 mm).
  • Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.