Engine
Engine Power
Tractor: 70 hp (52.2 kw) to 250 hp (186.4 kw)
Lubrication
Gear Lube 80-90W EP
Drivetrain
Driveline
Input: ASAE Cat. 6 with constant velocity u-joint | Intermediate & Wing: Cat. 5 with slip-clutch
Gearbox
Horsepower: 250 hp (186.4 kw) Splitter / 210 hp (156.6 kw) Center & Wing
Wheels & Tires
Wheels
6" x 9 x 21" Laminated tires / 29" x 9" Used aircraft tires without foam filling / 27" x 7.75" Used aircraft tires with foam filling | Number of : 6 - Wheel option: 4 on transport axle and one on each wing axle. / 8 - Wheel option: 4 on transport axle and two on each wing axle.
Operational
Operating Speed
Blade Tip: Up to 17,000 fpm (86.4 mps)
Chassis
Hitch/Type
Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch | Jack: Standard
Lights and Safety
Lighting
Signal: LED | 7 Pin connector: SAE J560 pin configuration
Dimensions
Dimensions
Cutting Capacity: 3" (7.6 cm) | Lift Hydraulics Center Deck: 3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers. / Right Wing: 3" x 8" Rephasing hydraulic cylinder with hoses & fittings. / Left Wing: 2 3/4" x 8" Rephasing hydraulic cylinder with hoses & fittings. | Wing Folding Hydraulics: Two 3" x 12" single-acting hydraulic cylinders complete with hoses & fittings. | Wing flex while operating: Max. 20o down can float up as needed as long as the wheel(s) are still on the ground. | Side Skirt Material: 1/4" (6 mm) plate. | Six Blades (2 per Carrier): 1/2" (13 mm) x 4" ( 10.2 cm) Heat treated free swinging alloy steel with up lift. | Blade Overlap: 6" (15.2 cm) | Stump Jumper / Blade Holder: 1" (2.5 cm) Thick diamond blade bar | Axle Fasteners: 1 1/4" (3.2 cm)
Cutting Width
20' - 0" (6.1 m)
Overall Width
21' - 0 1/2" (6.41)
Transport Width
Min: 9' - 11" (3.02m) With cutting height at 2" (5.1 cm)
Overall Length
17' - 8 1/2" (5.4 m) With cutting height at 2" (5.1 cm)
Deck Height
13" (33 cm)
Height
Cutting: 2" (5.1 cm) to 12" (30.5 cm)
Capacities
Oil capacity
Gearbox: 6.2 Pints (2.93 L): Divider Gearbox / 4.7 Pints (4.7 L): Center deck, LH deck & RH deck spindle gearboxes
Features
Jack: 7,000 lbs (3175.1 kg)
Weights
Weight
Total Machine: 6,540 lb (2966.5 kg) Front & rear single chain guards, 6 - AC/FF tires, CV Driveline, standard clevis, & diamond blade bar with dishpan. | Tongue: 2,160 lb (979.8 kg)
Features
Features
Wing flex while operatingSkid Shoes Wing Deck: Reversible & Replaceable: 2 straight skid shoes and 2 AR400 leading skid shoes. / Center Deck: Replaceable: 2 skid shoes | Blade Bolt: Keyed with hardened flat washer & locknut. | Front & Rear Guards: Single chain or double chain. | Transport Axle: Spring-cushioned on center transport axle. | Axle Fasteners: Greasable pins
Construction Material, Deck
1 - Piece, 10 gauge (3.4 mm)
Hub Type
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.
