2024 Land Pride RC4715 Series RCM4715

Information

2024 Land Pride RC4715 Series RCM4715

The RC4715 (RCM4715) is a heavy-duty folding rotary cutter with a 4" cutting capacity and 15' cutting width designed to make pasture and roadside maintenance a simple and efficient task. The unit comes with ease of maintenance features that you've come to expect from Land Pride like greaseless pivot points, endcap grease zerks, easy-off shields and a patented sliding guard over the splitter gearbox, making maintenance easy to perform. There are multiple axle options, including Land Pride's patented parallel pivot that gives you unmatched ground contact for improved holding power on hills and inclines, as well as 5 tire options in 6 or 8 tire configurations.

Features may include:

GEARBOX WARRANTY

7 Year Limited Gearbox Warranty shows confidence in gearbox integrity.

4" CUTTING CAPACITY

These cutters offers 4" cutting capacity. See Operator's Manual for more information.

ADJUSTABLE JACK ANGLE

Helps keep park jack vertical when in use.

LED SIGNAL LIGHTS

LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

BEVELED SKID SHOES

Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.

SLIDING GUARD

Easy-off shields and a patented sliding guard over the splitter gearbox make maintenance easy to perform.

DIAMOND BLADE BAR

Forged diamond blade bar provides strength where it's needed most.

PARALLEL PIVOT AXLE

Patented parallel pivot axle gives you unmatched ground contact for improved holding power on hills and inclines.

SPRING CUSHIONED AXLES

Spring cushioned axles improve ride and are available options on both center and wing axles.

Photos

Highlights

  • Windsor, Nova Scotia
  • 2024
  • Land Pride
  • RC4715 Series RCM4715
  • Available
  • Cutting: 1-1/2" - 16" (3.8 cm - 40.6 cm) - Varies by tire option.

Specifications

  • 2024
  • Land Pride
  • RC4715 Series
  • RCM4715
  • Rotary Cutters
  • Horsepower range: 55-250 hp (41-186.4 kW)
  • Gearbox: Gear Lube 80-90W EP
  • Input 540 & 1000 rpm: Cat. 6 with constant velocity u-joint with or without overrunning clutch. | Intermediate: Category 4 with slip-clutch. | Wing: Category 4 with slip-clutch or Category 5 with slip-clutch.
  • horsepower: 540 rpm or 1000 rpm 250hp (186.4 kW) Divider and 210hp (156.6 kW) Center & Wings
  • 21" (53.3 cm) or 26" (66 cm) Laminated tires / 24" (61 cm) Used aircraft, foam filled tires / 25.5" (64.8 cm) 20 ply tires, foam filled or pneumatic / 29" (73.7 cm) Used aircraft tires | Number of: 6 - Wheel option: Four on transport axle and one on each wing axle. / 8 - Wheel option: Four on transport axle and two on each wing axle
  • Blade tip - At 540 rpm: Center Blades & Wing Blades = 16,300 FPM (82.8 mps) / At 1000 rpm: Center Blades = 16,300 FPM (82.8 mps) & Wing Blades = 16,000 FPM (81.3 mps)
  • Swivel Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch.
  • tongue: 5" x 3" (12.7 cm x 7.6 cm) rectangular tubing
  • Signal: LED / 7 Pin connector: SAE J560 pin configuration
  • Cutting capacity: 4" (10.2 cm) | Lift hydraulics 3" x 8" (7.6 cm x 20.3 cm) hydraulic cylinder, hoses, fittings & stroke control spacers. | Wing flex while operating: Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground. | Wing hydraulics: 2 1/2" x 12" (6.4 cm - 30.5 cm) hydraulic cylinders, hoses & fittings. | Side skirt thickness: 1/4" (6 mm) | Blades - 6 (2 per carrier): 1/2" x 4" (1.3 cm - 10.2 cm) Heat-treated, free-swinging alloy steel with uplift. | Blade overlap: 6" (15.2 cm) | Stump jumper / blade holder: 3/16" (5 mm) Thick round dish shaped pan, reinforced with 1" x 4" (2.5 x 10.2 cm) blade bar. | LP Performance hitch & Bar tite hitch pivot shaft diameter: 2 1/4" (5.7 cm)
  • 15'-0" (4.57 m)
  • 15'-10" (4.83 m)
  • width with 21" tires: 10'-3" (3.12 m) - Single-acting fold option, 7’-3" (2.21 m) - Dual-acting fold option.
  • 16'-3" (4.95 m) - With center deck raised fully up.
  • 12" (30.5 cm)
  • Cutting: 1-1/2" - 16" (3.8 cm - 40.6 cm) - Varies by tire option.
  • Gearbox: Splitter: 3.5 pints (1.66 L); Center deck & Wings: 6 pints (2.84 L)
  • Wing transport protection: Wing Transport Lock Pins | Skid shoes: Wing Deck: 1 Replaceable skid shoe per wing. / Center Deck: 2 Replaceable skid shoes and multiple mounting locations. | Blade bolt: Keyed with hardened flat washer & locknut. | Transport axle: Many configurations to choose from.
  • Machine - Total: 5,000 lbs. (2268 kg) / Tongue: 1860 lbs. (843.7 kg)
  • thickness: 10 Gauge (3.4 mm)
  • Side skirt thickness: Steel
  • Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.