2024 Land Pride RC5020 Series RC5020-2

Current Land Pride Rotary-Cutters RC5020 Series

Swipe to View More

Year 2024
Make Land Pride
Model RC5020 Series

Year 2024
Manufacturer Land Pride
Model Name RC5020 Series
Trim Name RC5020-2
Generic Type (Primary) Rotary Cutters
Engine Power Min: 90 power take-off horsepower (67.1 kw)
Lubrication Gearbox: 80-90w EP gear lube

The heavy duty RC5020 and RCM5020 Series Rotary Cutters are designed and built by Land Pride to provide excellent cutting performance on gently sloping or slightly contoured right of ways, roadsides, pastures, setaside acres, or for residue in row crop fields. The 20' cutting width, 2" to 14" cutting height and ability to cut weeds and brush up to 3" in diameter make them well suited for these applications. Both models offer pull-type self-leveling clevis hitches for attachment to 90-250 hp tractors. They also offer various safety guard selections making them an excellent choice for state and municipal mowing applications.

Features may include:

GEARBOX WARRANTY

7 Year Limited Gearbox Warranty shows confidence in gearbox integrity.

3" CUTTING CAPACITY

These cutters offers 3" cutting capacity. See Operator's Manual for more information.

ADJUSTABLE JACK ANGLE

Helps keep park jack vertical when in use.

LED SIGNAL LIGHTS

LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

BEVELED SKID SHOES

Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.

DIAMOND BLADE CARRIER

The diamond blade carrier handles most cutting conditions and leaves a cleaner cut.

DISHPAN OPTION

The dishpan option assists the blade carrier in passing over obstructions that could damage the blade carrier.

Engine

Engine Power Min: 90 power take-off horsepower (67.1 kw)

Lubrication Gearbox: 80-90w EP gear lube

Drivetrain

Driveline Heavy duty Input options: Constant velocity u-joint ASAE Cat. 6 with or without over running clutch | Heavy duty Intermediate & wing: ASAE Cat. 5 with slip-clutch protection

Gearbox 250 (186.4 kw) Splitter / 225 (167.8 kw) Center deck & wing decks

Wheels & Tires

Tires, Rear Specification 6" x 21" Laminated tires / 6" x 26" Laminated tires / 27" x 7.75" x 15" Used aircraft tires with foam filling / 29" Used aircraft tires

Wheels 6 - Wheel option: 4 on transport axle and one on each wing axle / 8 - Wheel option: 4 on transport axle and two on each wing axle

Operational

Operating Speed Blade Tip - At 540 rpm: Center blade: 17,377 FPM (88.3 mps) & wing blade: 17,329 FPM (88 mps) | At 1000 rpm: Center blade: 18,165 FPM (92.3 mps) & wing blade: 18,317 FPM (93.1 mps)

Chassis

Hitch/Type Standard clevis hitch, pintle hitch, ball hitch, LP performance hitch and bar-tite hitch | Jack: Standard hand crank

Deck Thickness Sheet: 10g (3.4 mm) top and 10g (3.4 mm) bottom

Lights and Safety

Lighting Signal lights: LED (standard) | 7 Pin connector: SAE J560 pin configuration

Safety Features Wing transport protection: Wing transport locks

Dimensions

Dimensions Cutting capacity: Up to 3" (7.6 cm) material | Lift hydraulics: 4" x 8" Hydraulic cylinder, hoses, fittings & stroke control spacers | Wing flex while operating: Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground. | Wing hydraulics: 3 1/2" x 12" Hydraulic cylinders, hoses & fitting | Side skirt thickness: 1/4" (6 mm) | Blade overlap: 6" (16.2 cm) | Stump jumper Blade holder: 1" (2.5 cm) diamond shaped blade bar

Height Cutting: 2" (5.1 cm) to 14" (35.6 cm) with hydraulic cylinder and stroke control spacers

Cutting Width 20'-0" (6.10 m)

Deck Height 10 1/2" (3.06 m)

Overall Length 19'-3" (5.87 m)

Overall Width 20'-10" (6.35 m)

Transport Width Min: 8'-9" (2.44 m)

Blade Composition 6 (2 per carrier): 1/2" (13 mm) x 4" (10.2 cm) Heat-treated, free-swinging alloy steel with uplift

Capacities

Oil capacity Gearbox: Center deck & wings - 10 pints (4.73 L) / Divider gearbox - 5.5 pints (2.60 L)

Weights

Weight Machine: 7,340 lbs (3,329.4 kg) | Tongue: 2,668 lbs (1,210.2 kg)

Features

Features Skid shoes: Wing decks - Replaceable and reversible / Center deck: Replaceable | Blade bolt: Keyed with hardened flat washer & locknut | Front & rear guards: Single chain or double chain | Transport axle: Spring-cushioned on center transport axle

Hub Type Cast iron 5-bolt hubs with tapered roller bearings and with 1 3/4" (4.4 cm) shafts

2024 Land Pride RC5020 Series RC5020-2