2024 Land Pride RC5020 Series RCM5020-2

Information

2024 Land Pride RC5020 Series RCM5020-2

The heavy duty RC5020 and RCM5020 Series Rotary Cutters are designed and built by Land Pride to provide excellent cutting performance on gently sloping or slightly contoured right of ways, roadsides, pastures, setaside acres, or for residue in row crop fields. The 20' cutting width, 2" to 14" cutting height and ability to cut weeds and brush up to 3" in diameter make them well suited for these applications. Both models offer pull-type self-leveling clevis hitches for attachment to 90-250 hp tractors. They also offer various safety guard selections making them an excellent choice for state and municipal mowing applications.

Features may include:

GEARBOX WARRANTY

7 Year Limited Gearbox Warranty shows confidence in gearbox integrity.

3" CUTTING CAPACITY

These cutters offers 3" cutting capacity. See Operator's Manual for more information.

ADJUSTABLE JACK ANGLE

Helps keep park jack vertical when in use.

LED SIGNAL LIGHTS

LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

BEVELED SKID SHOES

Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.

DIAMOND BLADE CARRIER

The diamond blade carrier handles most cutting conditions and leaves a cleaner cut.

DISHPAN OPTION

The dishpan option assists the blade carrier in passing over obstructions that could damage the blade carrier.

Photos

Highlights

  • Windsor, Nova Scotia
  • 2024
  • Land Pride
  • RC5020 Series RCM5020-2
  • Available
  • Cutting: 2" (5.1 cm) to 14" (35.6 cm) with hydraulic cylinder and stroke control spacers

Specifications

  • 2024
  • Land Pride
  • RC5020 Series
  • RCM5020-2
  • Rotary Cutters
  • Min: 90 power take-off horsepower (67.1 kw)
  • Gearbox: 80-90w EP gear lube
  • Heavy duty Input options: Constant velocity u-joint ASAE Cat. 6 with or without over running clutch | Heavy duty Intermediate & wing: ASAE Cat. 5 with slip-clutch protection
  • 250 (186.4 kw) Splitter / 225 (167.8 kw) Center deck & wing decks
  • 6" x 21" Laminated tires / 6" x 26" Laminated tires / 27" x 7.75" x 15" Used aircraft tires with foam filling / 29" Used aircraft tires
  • 6 - Wheel option: 4 on transport axle and one on each wing axle / 8 - Wheel option: 4 on transport axle and two on each wing axle
  • Blade Tip - At 540 rpm: Center blade: 17,377 FPM (88.3 mps) & wing blade: 17,329 FPM (88 mps) | At 1000 rpm: Center blade: 18,165 FPM (92.3 mps) & wing blade: 18,317 FPM (93.1 mps)
  • Standard clevis hitch, pintle hitch, ball hitch, LP performance hitch and bar-tite hitch | Jack: Standard hand crank
  • Sheet: 10g (3.4 mm) top and 10g (3.4 mm) bottom
  • Signal lights: LED (standard) | 7 Pin connector: SAE J560 pin configuration
  • Wing transport protection: Wing transport locks
  • Cutting capacity: Up to 3" (7.6 cm) material | Lift hydraulics: 4" x 8" Hydraulic cylinder, hoses, fittings & stroke control spacers | Wing flex while operating: Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground. | Wing hydraulics: 3 1/2" x 12" Hydraulic cylinders, hoses & fitting | Side skirt thickness: 1/4" (6 mm) | Blade overlap: 6" (16.2 cm) | Stump jumper Blade holder: 1" (2.5 cm) diamond shaped blade bar
  • Cutting: 2" (5.1 cm) to 14" (35.6 cm) with hydraulic cylinder and stroke control spacers
  • 20'-0" (6.10 m)
  • 10 1/2" (3.06 m)
  • 19'-3" (5.87 m)
  • 20'-10" (6.35 m)
  • Min: 8'-9" (2.44 m)
  • 6 (2 per carrier): 1/2" (13 mm) x 4" (10.2 cm) Heat-treated, free-swinging alloy steel with uplift
  • Gearbox: Center deck & wings - 10 pints (4.73 L) / Divider gearbox - 5.5 pints (2.60 L)
  • Machine: 7,340 lbs (3,329.4 kg) | Tongue: 2,668 lbs (1,210.2 kg)
  • Skid shoes: Wing decks - Replaceable and reversible / Center deck: Replaceable | Blade bolt: Keyed with hardened flat washer & locknut | Front & rear guards: Single chain or double chain | Transport axle: Spring-cushioned on center transport axle
  • Cast iron 5-bolt hubs with tapered roller bearings and with 1 3/4" (4.4 cm) shafts