2024 Land Pride RCB5710 Series RCBM5710

Current Land Pride Rotary-Cutters RCB5710 Series

Swipe to View More

Year 2024
Make Land Pride
Model RCB5710 Series

Year 2024
Manufacturer Land Pride
Model Name RCB5710 Series
Trim Name RCBM5710
Generic Type (Primary) Rotary Cutters
Engine Power horsepower range: 60 - 250 hp (44.7 - 186.4 kW)
Lubrication Gearbox: Gear Lube 80-90W EP

The RCB5710 Rotary Cutters are single wing mowers that are ideal for roadside mowing. The left-hand wing is replaced with a weight box on the RCB and the right-hand wing is replaced with a weight box on the RCBML models. This allows the operator to travel next to the road’s shoulder, remaining on more level ground. All the features you love from our 15-foot cutters are there too, in a 10-foot single wing model!

Engine

Engine Power horsepower range: 60 - 250 hp (44.7 - 186.4 kW)

Lubrication Gearbox: Gear Lube 80-90W EP

Drivetrain

Gearbox horsepower 540 rpm or 1000 rpm / 250 hp (186 kW) Divider and 225 hp (168 kW) Center & Wing

Driveline input 540 & 1000 rpm: Cat. 6 with constant velocity u-joint with or without over-running clutch. | Intermediate: Category 5 with slip-clutch. | Wing: Category 4 with slip-clutch or Category 5 with slip-clutch.

Wheels & Tires

Wheels Number of: 5 - Wheel option: Four on transport axle and one on the wing axle. / 6 - Wheel option: Four on transport axle and two on the wing axle. | 21" (53.3 cm) or 26" (66 cm) Laminated tires. / 24" (61 cm) Used aircraft, foam filled tires. / 25.5" (64.8 cm) 20 ply tires, foam filled or pneumatic. / 29" (73.7 cm) Used aircraft tires.

Operational

Operating Speed Blade tip - At 540 rpm: Center Blades & Wing Blades = 16,400 FPM (83 mps) / At 1000 rpm: Center Blades = 16,400 FPM (83 mps) & Wing Blades = 16,000 FPM (81.3 mps)

Chassis

Frame Type tongue: 5" x 3" (12.7 cm x 7.6 cm) rectangular tubing

Hitch/Type Constant Level Swivel Clevis Hitch, LP Performance HitchTM, Self Leveling Bar-Tite Hitch, Ball Hitch, or Constant Level Pintle Hitch.

Lights and Safety

Lighting Signal: LED / Seven pin connector: SAE J560 pin configuration

Dimensions

Dimensions Cutting capacity: 5" (13 cm) | LP Performance Hitch & BarTite hitch pivot shaft diameter: 2 1/4" (5.7 cm) | Lift hydraulics Center deck: 3 1/2" x 8" hydraulic cylinder, hoses, fittings & flip-over spacers / Wing: 3 1/4" x 8" Re-phasing hydraulic cylinder with hoses & fittings | Wing flex while operating: Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground. | Wing hydraulics: 3" x 12" hydraulic cylinder, hoses & fittings. | Blades - 4 (2 per carrier): 1/2" x 4" (1.3 cm - 10.2 cm) Heat-treated, free-swinging alloy steel with uplift. | Blade overlap: 6" (15.2 cm)

Cutting Width 10'-5" (3.18 m)

Overall Width 11'-11" (6.3 m)

Transport Width with 21" tires: 9'-1" (2.77 m) - Single-acting fold option, 7’-3" (2.21 m) - Dual-acting fold option.

Overall Length 16'-3" (4.95 m) - With center deck raised fully up.

Deck Height 12" (30.5 cm)

Height Cutting: 1-1/2" - 16" (3.8 cm - 40.6 cm)

Capacities

Oil capacity Gearbox: Splitter gearbox: 5.5 pints (2.6 L); Blade spindle gearboxes: 12.4 pints (5.87 L)

Features Hitch jack: 7,000 lbs (3175.1 kg)

Weights

Weight Machine: 5,740 lbs (2604 kg) | Tongue: 2,218 lbs (1006 kg) with the wing down. 2,302 lbs (1044 kg) with wing folded-up.

Features

Features Wing transport protection: Wing Transport Lock Pins | Wing Deck skid shoes: One leading hardened beveled skid shoe and one trailing standard beveled skid shoe. | Weight box skid shoes: One leading and one trailing hardened beveled skid shoes that are reversible/replaceable and one replaceable intermediate beveled skid shoe. | Center deck skid shoes: Two replaceable beveled skid shoes and multiple mounting locations | Blade bolt: Keyed with hardened flat washer & locknut. | Stump jumper / blade holder options: Forged blade bar without the dish pan. / Thick 3/16" (5 mm) round dish shaped pan, reinforced with the forged blade bar. / Thick 3/16" (5 mm) round dish shaped pan, reinforced with the heavy duty blade plate. | Transport axle: Many configurations to choose from

Construction Material, Deck thickness: Top deck plate = 10 Gauge (3.4 mm); Bottom deck plate = 3/16" (5 mm)

Construction Material Side skirt: Removable/replaceable 1/4" (6 mm) steel. | Deck ArmorTM option: 5/16" (8 mm) Steel plate

Hub Type Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.

2024 Land Pride RCB5710 Series RCBM5710