2024 Land Pride RCB5715 Series RCB5715

Current Land Pride Rotary-Cutters RCB5715 Series

Swipe to View More

Year 2024
Make Land Pride
Model RCB5715 Series

Year 2024
Manufacturer Land Pride
Model Name RCB5715 Series
Trim Name RCB5715
Generic Type (Primary) Rotary Cutters
Engine Power horsepower range: 60 - 250 hp (44.7 - 186.4 kW)
Lubrication Gearbox: Gear Lube 80-90W EP

The RCB5715 is Land Pride’s new heavy-duty 15' double-deck rotary cutter designed to make right-of-way and roadside maintenance a simple and efficient task and comes with 4 patented features. The RCB57 also features greaseless pivot points, endcap grease zerks, easy-off shields, and a patented sliding guard over the splitter gearbox, making maintenance easy to perform. The RCB5715 model features rephasing cylinders on the wings.

Engine

Engine Power horsepower range: 60 - 250 hp (44.7 - 186.4 kW)

Lubrication Gearbox: Gear Lube 80-90W EP

Drivetrain

Gearbox 540 rpm or 1000 rpm / 250 hp (186 kW) Divider and 225 hp (168 kW) Center & Wings

Driveline Input 540 & 1000 rpm: Cat. 6 with constant velocity u-joint with or without over-running clutch. | Intermediate: Category 5 with slip-clutch. | Wing: Category 4 with slip-clutch or Category 5 with slip-clutch.

Wheels & Tires

Wheels Number of: 6 - Wheel option: Four on transport axle and one on each wing axle. / 8 - Wheel option: Four on transport axle and two on each wing axle. | 21" (53.3 cm) or 26" (66 cm) Laminated tires. /24" (61 cm) Used aircraft, foam filled tires. / 25.5" (64.8 cm) 20 ply tires, foam filled or pneumatic. / 29" (73.7 cm) Used aircraft tires.

Operational

Operating Speed Blade tip - At 540 rpm: Center Blades & Wing Blades = 16,400 FPM (83 mps) / At 1000 rpm: Center Blades = 16,400 FPM (83 mps) & Wing Blades = 16,000 FPM (81.3 mps)

Chassis

Frame Type tongue: 5" x 3" (12.7 cm x 7.6 cm) rectangular tubing.

Hitch/Type Constant Level Swivel Clevis Hitch, LP Performance HitchTM, Self Leveling Bar-Tite Hitch, Ball Hitch, or Constant Level Pintle Hitch.

Lights and Safety

Lighting Signal: LED / Seven pin connector: SAE J560 pin configuration

Dimensions

Dimensions Cutting capacity: 5" (13 cm) | LP Performance Hitch & BarTite hitch pivot shaft diameter: 2 1/4" (5.7 cm) | Lift hydraulics Center deck: 3 1/2" x 8" Re-phasing hydraulic cylinder with hoses, fittings & flip-over spacers / Right wing: 3 1/4" x 8" Re-phasing hydraulic cylinder with hoses & fittings / Left wing: 3" x 8" Re-phasing hydraulic cylinder with hoses & fittings | Wing flex while operating: Max. 20o down, can float up as needed as long as the wheel(s) are still on the ground. | Wing hydraulics: 3" x 12" hydraulic cylinders, hoses & fittings. | Blades - 6 (2 per carrier): 1/2" x 4" (1.3 cm - 10.2 cm) Heat-treated, free-swinging alloy steel with uplift. | Blade overlap: 6" (15.2 cm)

Cutting Width 15'-0" (4.57 m)

Overall Width 16'-0" (4.88 m)

Transport Width with 21" tires: 10'-3" (3.12 m) - Single-acting fold option, 7’-3" (2.21 m) - Dual-acting fold option

Overall Length 16'-3" (4.95 m) - With center deck raised fully up.

Deck Height 12" (30.5 cm)

Height Cutting: 1-1/2" - 16" (3.8 cm - 40.6 cm) - Varies by tire option.

Capacities

Oil capacity Gearbox: Splitter: 5.5 pints (2.6 L); Center deck & Wings: 12.4 pints (5.87 L)

Features Hitch jack: 7,000 lbs. (3175.1 kg)

Weights

Weight Machine: 6860 lbs (3112 kg) | Tongue: 2,420 lbs (1098 kg) with wings down.

Features

Features Wing transport protection: Wing Transport Lock Pin | Wing deck skid shoes: Each wing has one leading hardened beveled skid shoe and one trailing standard beveled skid shoe. Both are reversible and replaceable. | Center deck skid shoes: Two replaceable beveled skid shoes and multiple mounting locations. | Blade bolt: Keyed with hardened flat washer & locknut. | Stump jumper / blade holder options: Forged blade bar without the dish pan. / Thick 3/16" (5 mm) round dish shaped pan, reinforced with the forged blade bar. / Thick 3/16" (5 mm) round dish shaped pan, reinforced with the heavy duty blade plate. / Stacked blade shredder Kit without the dish pan. | Transport axle: Many configurations to choose from.

Construction Material, Deck thickness: Top deck plate = 10 Gauge (3.4 mm); Bottom deck plate = 3/16" (5 mm)

Construction Material Side skirt construction: Removable/replaceable 1/4" (6 mm) steel.

Hub Type Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts.

2024 Land Pride RCB5715 Series RCB5715