2024 Land Pride RCD18 Series RCD1884

Information

2024 Land Pride RCD18 Series RCD1884

Land Pride's RCD18 Series is a smooth-top, offset cutter that performs best in grass-only applications. Being dual spindle, the cutter is shorter in length than single spindle 84" cutters; the reduced length allows for better maneuverability in tight spaces. The 10" offset makes the RCD1884 a good solution for applications that require cutting close to buildings, fences, or other obstacles that might be found in orchards, parks, or rights-of-way.

Features may include:

QUICK-HITCH COMPATIBLE

Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.

GEARBOX WARRANTY

5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

1-1/2" CUTTING CAPACITY

These cutters offers 1-1/2" cutting capacity. See Operator's Manual for more information.

OFFSET HITCH

Hitch offsets 10" to the right to cover your tractor tire and get closer to obstructions.

DUAL GEARBOXES

Dual gearboxes allow lower horsepower tractors to cut 84" swaths.

INTERMEDIATE DRIVELINE

Intermediate driveline transfers loads from center box to wing box to ensure proper cut quality.

Photos

Highlights

  • Windsor, Nova Scotia
  • 2024
  • Land Pride
  • RCD18 Series RCD1884
  • Available
  • Cutting: 2" to 12" (5 to 31 cm)

Specifications

  • 2024
  • Land Pride
  • RCD18 Series
  • RCD1884
  • Rotary Cutters
  • Recommended Tractor Take-Off Horsepower: 35-60 horsepower (26-45 kW)
  • Gearbox: EP 80-90W oil
  • 90 hp (67 kW) main gearbox and 45 horsepower (34 kW) side gearbox With speed-up beveled gears, cast iron housing, and 1.67" output shaft
  • Main: ASAE Category 3 | Main Protection: 2 plate slip clutch
  • Power Take-Off: 540 rpm | Blade Tip: 11,693 fpm (59 mps)
  • Category l with clevis type lower links and floating top linkage Quick Hitch adaptable
  • Offset Distance to the Right: 10" (25 cm) | Cutting Capacity: 1 1/2" (3.8 cm) Diameter | Stump Jumper: 10 Gauge (3.4 mm) x 24" (61 cm) Round dish pan with 1" x 4" x 19 1/2" (2.5 x 10 x 49 cm) blade bar | Blades (4): 1/2" x 4" x 16" (13 x 102 x 406 mm) | Blade Overlap: 5" (13 cm)
  • 84" (213 cm)
  • 87" (221 cm)
  • 81" (206 cm)
  • at Rear: 11 5/8" (29.5 cm)
  • Cutting: 2" to 12" (5 to 31 cm)
  • Gearbox - Main: 4.7 pints (2.2 L) / Side: 3.5 pints (1.7 L)
  • Machine with Dual Laminated Tailwheels: 900 lbs (408 kg) / 905 lbs (411 lg)
  • Blades (4): Heat treated alloy steel free-swinging suction blades | Blade Bolts: Keyed with harden flat washers and locknuts | Tailwheel Mount: Caster fork with 360 degree swivel
  • All welded deck | Thickness: 10 Gauge (3.4 mm)
  • Side Skirt Thickness: 10 Gauge (3.4 mm)