2024 Land Pride RCF20 Series RCF2084

Information

2024 Land Pride RCF20 Series RCF2084

The Land Pride smooth-top RCF2084 Rotary Cutter will quickly tackle pastures and light brush with its 84" cutting width and 2" cutting capacity. The floating top link permits the deck to follow the terrain for an even cut. This cutter has a Category I and II 3-Point hitch that is Quick Hitch adaptable. The standard ASAE Category 4 driveline is offered with 2-plate slip-clutch to protect your cutter investment.

Features may include:

QUICK-HITCH COMPATIBLE

Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.

GEARBOX WARRANTY

5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

2" CUTTING CAPACITY

These cutters offers 2" cutting capacity. See Operator's Manual for more information.

FLOATING TOP LINK

Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors.

EXTENDED CUTTER FRONT

Extended cutter front allows for increased material flow and added protection.

Photos

Highlights

  • Windsor, Nova Scotia
  • 2024
  • Land Pride
  • RCF20 Series RCF2084
  • Available
  • Cutting: 1 1/2" to 12" (4-30 cm)

Specifications

  • 2024
  • Land Pride
  • RCF20 Series
  • RCF2084
  • Rotary Cutters
  • Recommended tractor: 45-90 hp (34-67 kW)
  • Gearbox: 1:1.44
  • Construction: Speed-up beveled gears, cast iron housing | Type: EP 80-90W oil
  • ASAE Category 4 | Protection: 2 Plate slip clutch
  • Tailwheel Mount: Welded A-arm and caster fork with 360 degree swivel | Tailwheel: 4" x 8" x 15" Laminated tire with cast iron hub
  • Power take-off: 540 rpm | Blade Tip: 17,113 FPM
  • Category l & II with floating top linkage, Quick Hitch ready
  • Cutting Capacity: 2" (5 cm) Diameter | Gearbox Construction: 1 3/8"-6 spline input shaft and 2" output shaft | Stump Jumper: 3/16" x 27" (5 mm x 69 cm) Oval Pan with 1" (2.5 cm) thick blade holder bar | Blades (2): 1/2" x 4" x 31" Heat treated alloy steel free-swinging high lift
  • 84" (213 cm)
  • 89" (226 cm)
  • Singe Tailwheel: 133 1/4" (339 cm) / Dual Tailwheel: 126" (320 cm)
  • Bottom of Deck to Bottom of Skid Shoe: 11 15/16" (30 cm)
  • Cutting: 1 1/2" to 12" (4-30 cm)
  • Gearbox: 7 Pints
  • Machine - Single Tailwheel: 1,047 lbs (475 kg) with Front Rubber Guard and Rear Metal Band. / Dual Tailwheel: 1,155 lbs (524 kg) with Front Rubber Guard and Rear Metal Band.
  • Skid Shoes: Full length weld-on skid shoes | Blade Bolts: Keyed with harden flat washers and locknuts. | Rear Guard: Metal Band
  • All welded deck | Deck Material Thickness: 10 Gauge (3.4 mm) | Side Skirt Material Thickness: 10 Gauge (3.4 mm)